Eight usage specifications and maintenance methods of pipe bending machines
The pipe bender is a new type of pipe bending tool with pipe bending and lifting functions. It has many advantages such as reasonable structure, safe use, convenient operation, reasonable price, fast loading and unloading, easy to carry, and one machine for multiple uses. It occupies a large share in the domestic hydraulic pipe bender market and is mainly used for pipe installation and repair in factories, warehouses, docks, buildings, railways, and automobiles. In addition to the pipe bending function, it can also remove the pipe bending parts and use it as a separate hydraulic lifting machine.
Then the purchased pipe bender should pay attention to the following when using it:
- Before operation, please check whether the lubrication points of the machine are short of oil, whether the safety protection device is reliable, and whether the movement mechanism is loose. After confirmation, start the operation.
- Start the pipe bender oil pump to check whether the system pressure is kept within the specified range. If it is high, it will damage the hydraulic components and waste power. If it is too low, it will affect the work.
- Adjust the required position and angle of the parts, and position the machine to the required length.
- Adjust the vertical lifting guide rail so that the guide die clamping cylinder can move forward to clamp the iron pipe.
- Make the clamping die clamping cylinder clamp the iron pipe.
- Put the workpiece into the bending die in normal operation, and the front end is in contact and positioned, and step on the foot switch to complete it.
- After the work is completed, cut off the power supply and do a good job of cleaning and lubrication.
- If there is an emergency when operating the pipe bending machine, press the emergency stop button, turn the rotary switch to the manual position, and reset it manually. If a fault occurs, please report it in time.
Let's talk about eight methods for maintaining the pipe bending machine:
1: When operating the pipe bending machine, you must strictly follow the operating regulations (key points).
2: The pipe bending machine must be kept clean, and please apply anti-rust grease to the unpainted parts.
3: Before starting the pipe bending machine each time, add lubricating oil at a fixed time, fixed point, and fixed quantity according to the requirements of the lubrication chart. The oil should be clean and free of precipitation.
4: Regularly check and repair switches, insurances, and handles to ensure their reliable operation.
Five: The lubricating oil in the motor bearing should be replaced and filled regularly, and the motor part should be checked frequently to see if it is working normally.
Six: Check the V-belt, handle, knob, and button regularly to see if they are damaged. If they are seriously worn, they should be replaced in time.
Seven: It is strictly forbidden for non-designated personnel to operate the equipment. Normally, the machine must be stopped when people leave.
Eight: Lubricate and clean the pipe bending machine 10 minutes before leaving get off work every day.
Finally, the platform and experts said that in addition to the pipe bending function, the pipe bending machine can also remove the cylinder in the pipe bending component and use it as a separate hydraulic jacking machine. Generally, good anti-emulsification and anti-foaming properties are used. Good lubrication performance engine oil.
